PDA

View Full Version : [Help]Crack system c5

C5
03-06-2006, 15:02
Hi all!
I need crack the system of c5, i use patcher.exe but i have error with decrypt, You can crack the original system c5?
Here is the link
http://rapidshare.de/files/22101696/systemc5.rar.html
-----------------
Sorry for my bad english
dstuff
03-06-2006, 17:17
I suggest you look at a small junk you have left in that folder besides other files. You could also look at the file at which it fails. Or you can read about patcher's flags...

*sigh*
c5
03-06-2006, 23:42
I suggest you look at a small junk you have left in that folder besides other files. You could also look at the file at which it fails. Or you can read about patcher's flags...

*sigh*
ok, but i have error in the patcher.exe, when i path the npcname-k.dat i have error. And I start the l2.exe and "General protection fault".
03-06-2006, 23:43
I suggest you look at a small junk you have left in that folder besides other files. You could also look at the file at which it fails. Or you can read about patcher's flags...

*sigh*
ok, but i have error in the patcher.exe, when i path the npcname-k.dat i have error. And I start the l2.exe and "General protection fault".

if it is not much annoyance, him request that me patches it or it says to me well like
dstuff
04-06-2006, 15:07
Because you encoded npcname-k.dat earlier.
C5
05-06-2006, 22:58
it cannot be, I have download the official files from the updater of the korean web
yumi
05-06-2006, 23:01
can you give me the link of the korean c5 ?
Please 8)
yumi
05-06-2006, 23:51
nvm found it^^
http://lineage2.nefficient.co.kr/lineage2/LIICH5Setup.exe
Twin
06-06-2006, 04:45
plz im noob

i just wanna play using c5

so what i need to do ? plz someone upload the working files to crack
dstuff
06-06-2006, 15:26
You have 2 files there that are not "original" :) They decode like files treated with l2encdec earlier.

npcname-k is ok, my bad.
06-06-2006, 15:57
plz upload the working system
C5
11-06-2006, 03:59
OS: Windows XP 5.1 (Build: 2600)
CPU: GenuineIntel Unknown processor @ 2804 MHz with 2046MB RAM
Video: No Video

General protection fault!

History: FFileManagerWindows::CreateFileReader <- FConfigFile::Read <- FConfigCacheIni::Find <- FConfigCacheIni::GetString <- InitEngine

Please help not working the l2encdec with c5 :(
C5
11-06-2006, 04:16
oooo nice nice, now working but... i have problems with the gameguard. I post the gameguard later. Thanks for the help
11-06-2006, 04:35
oooo nice nice, now working but... i have problems with the gameguard. I post the gameguard later. Thanks for the help
Look i have this problem:
http://img110.imageshack.us/img110/6518/shot000002bh.jpg
I start my l2j server with my system patched and i cant find the server, look the picture
C5
12-06-2006, 18:55
I use with the patcher.exe the command -f and works 100% but i cant connect to a server. Please help
Muadip
15-06-2006, 02:07
oooo nice nice, now working but... i have problems with the gameguard. I post the gameguard later. Thanks for the help

Can you post the gameguard? :P
Muadip
15-06-2006, 05:10
At me it has turned out to promote further away, I see a name of a server but at attempt to come the Server writes: session key is not correct.closing connection
C5
15-06-2006, 06:11
Please post a solution :(
Muadip
15-06-2006, 08:20
Please post a solution :(
Do you have icq?
my 301405064 :roll:
Muadip
15-06-2006, 09:18
Please post a solution :(
You nead Login Server protocol 660 ...
Plz give my GameGruard C5... :)
17-06-2006, 09:35
At me I have a problem with decoding C5 system I can not disassemble
itemname-k.dat, I shall be very grateful if you help my to disassemble
it.plz help and i share whith you our C5 system..
dstuff
17-06-2006, 13:18
You can use this ddf for itemname-k:

FS = "\t";
HEADER = 1;
RECCNT = OFF;
MTXCNT_OUT = 1;
MATCNT_OUT = 1;
ORD_IGNORE = 0;

{
UINT id;
UNICODE name;
UNICODE add_name;
ASCF description;
INT popup;
ASCF extra1;
ASCF extra2;
ASCF extra3;
ASCF extra4;
ASCF extra5;
ASCF extra6;
INT unk1;
ASCF extra7;
}

Anyway, it won't give you much, as all unicode letters are still converted to "-". And in korean that's almost all of them :)
Muadip
19-06-2006, 14:03
You can use this ddf for itemname-k:

FS = "\t";
HEADER = 1;
RECCNT = OFF;
MTXCNT_OUT = 1;
MATCNT_OUT = 1;
ORD_IGNORE = 0;

{
UINT id;
UNICODE name;
UNICODE add_name;
ASCF description;
INT popup;
ASCF extra1;
ASCF extra2;
ASCF extra3;
ASCF extra4;
ASCF extra5;
ASCF extra6;
INT unk1;
ASCF extra7;
}

Anyway, it won't give you much, as all unicode letters are still converted to "-". And in korean that's almost all of them :)

it do nothing! :( i recerve file 0kb empty file. Can you crack it and post in *.txt format if you ddo that i will translate C5 client in English
GoldGin
22-06-2006, 10:37
L2 disasm 0.92 beta by DStuff.

Counting field 'cnt2' referenced by 'tab2' is inappropriate (953516).
Total allocated by pooler: 4198400